| Rods Precision Cutting-Off And End Surface Grinding VEC-300,500,600G 射銷圓棒切斷及研磨機 FEATURES 1. During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions 2. The tightness of belt may be automatically adjusted and controlled （the larger the resistance, the tighter the belt.） 3. The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference of thickness of cutting – off sander piece. 4. The rapid chuck is used to hold the working quick, and Ø1-25mm is the same. 5. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability low wearing rate and long life. 6. The rapid positioning rule is in the unit of 20mm and provided with a micro rule （0mm to 25mm） of which the zeroing point is the dimensions at the rapid positioning point. 7. The minimum of cutting length is 60mm | 
QQ交談
MSN交談
