刀型閘閥的結構特點

一、可提升的閘板密封面，可刮除密封面上的粘著物，自動清除雜物。

二、不銹鋼閘板可防止腐蝕引起的密封泄漏。

三、整體的不銹鋼材質，可防止腐蝕破壞。

四、短結構長度，可節省原料、安裝空間，也有效支持管道強度。

五、科學上的密封填料函設計，使上密封安全有效，經久耐用。

六、三角形的支架節省原材料，保證需要的力學性能。

七、閥體上的導向塊使閘板正確運動。擠壓塊保證閘板有效密封。

八、閥體加強筋設計提高閥體強度。

九、不銹鋼閥桿經久耐用，雙頭螺使用啟閉更為迅速。

十、可任意選用驅動機構。

十一、v型閘板可作為調節閥使用。

刀型閘閥采用標準

一、閥門設計制造標準：jb/t8691、mss sp-81。

二、結構長度標準：gb/t15188.2、tappi tis405.8。

三、法蘭標準：jb79、ansi b16.5。

四、檢驗試驗標準：gb13927、mss sp-81、jb/t8691。

閥門選購須知

一、              用戶選購時，必須注明閥門公稱通徑、壓力及閥門連接所需標準，未注明時，以說明書尺寸給予制造。

二、              所需閥門如有特殊要求，必須注明特殊尺寸、特殊材質等各項參數，未注明，以企業規定材質給予制造。

三、              閥門驅動裝置無特別說明，以本公司規定給予配置。

四、              用戶提供閥門使用介質、溫度、壓力的，本公司則以給予選型。

使用說明

一、              用戶在安裝閥門前必須校對閥門型號、連接尺寸及注意介質流向，保證與閥門要求*性。

二、              用戶在安裝閥門時，必須彌留閥門驅動的必要空間。

三、              驅動裝置的接線須按線路圖進行。

四、              閥門必須定期保養，不得隨意碰撞及擠壓，以免影響密封。

structure characteristic of knife type gate valve

1、  it can rise sealing face of gate valve, scrape off the burs on the sealing face and clear away sundries automatically.

2、  the stainless steel disc can prevent from leaking that has been caused by corrosion.

3、  the full stainless steel material can avoid corrosive damage.

4、  short length structure can save original material and installation space and support pipe intension effectively.

5、  scientific design of upper sea stuffing box makes upper seal safe and effective and wear well

6、  triangular yoke saves original material to ensure demand the mechanical performance.

7、  the guiding bock on body makes disc move properly and extrusion block ensures disc to seal effectively.

8、  the body of valve with fortified design can increase the body intensity.

9、  stem in stainless steel wears well and double head bolt opens and closes faster.

10、it can se-lect any driving machine randomly.

11、v-pattern discs can be used as regulator valves.

the standardf knife type gate valve

1、  the standard valve design: jb/t8691、mss sp-81.

2、  the standard length structure: gb/t15188.2、tappi tis405.8

3、  the standard of frange: b79、ansi b16.5

4、  the standard of checking and examination: gb13927、mss sp-81、jb/t8691

notice for shopping valve

1、  when purchasing ，customers must give clear indication of nominal diameter of valve, nominal pressure and connection standard。 if no indication, we may manufacture products according to qualification.

2、  if the demanded valve has special requirements，users should indicate special size ，special material etc .if no indication, we will manufacture products according to the stated material of enterprise.

3、if driving actuator of valve without special specification, equip it according to the company specification.

4、the medium ,temperature and pressure of the valve provided by users, the subjected  company will se-lect the model.

use manual

1、  before installing valves, user must check the model, connection dimension, and flowing direction of the medium to ensure in accordance with the valve requirements.

2、  when installing valves , users should remain some needed space for driving valve.

3、  the driving actuator connect should according to circuit diagram.

4、  valve should be maintained timely, should not do any collision and extrusion randomly in case it affects seal.

主要性能規范 chief property and specification

主要零部件材質 material of main part

主要外形及連接尺寸 main external and connecting dimensions（mm）