YFT臥式液壓閥門試驗臺
技術性能與特點:
1.適用于對法蘭連接形式的閥門進行強度、密封和上密封性能的試驗。
2.采用夾爪抱壓法蘭方式壓緊,對被試驗閥門無外力影響,因此符合GB/T13927-92,JB/T9092-99及API598所規定的
要求。
3.右側翻轉盤可進行90度翻轉,便于對閥門進行氣密封檢測。
4.試驗介質可由水,氣或者煤油,由客戶自選。
5.已配置高、低壓水泵及增壓系統,可直接進行水壓試驗。預留一個氣泵接口,如采用氣為介質則氣泵需用戶自配。
6.試驗臺用水及油等試驗介質可循環使用。
7.設有液壓自動卸荷系統,使用時,高壓狀態與卸荷狀態自動切換,有效降低了油溫,延長設備使用壽命。
8.另有觸摸屏控制、顯示和打印測試壓力系統可選配。
Technical performance and feature:
1. YFT serie hydraulic valve test bench suitable for flange valve’s shell test, seal test and back seal test.
2. Using clamp to hold the flange, so there’s no external force effects on the test valve. It’s accord with the equirements of GB/T13927-92,JB/T9092-99 and API598.
3. Right workbench can turn over 90 degrees, for the convenience of carrying valve and seal test.
4. Test medium can be choosing by user, water, air or kerosene.
5. Test bench has low pressure water pump and water booster. There is an air connection reserved for air pump.
6. Water and hydraulic oil cycle use.
7. The test bench has an automatic oil pressure discharge system. When using it, the high pressure condition and the relief pressure condition can be changed by itself. So it can reduce oil temperature, elongate life of test bench.
8. PLC control, touch screen display pressure diagram and printer system is optional.
主要數據及規格:
型 號 | YFT-100 | YFT-200 | YFT-300 | YFT-400 | YFT-500 | YFT-600 | YFT-800 | YFT-1000 |
測試閥門通徑(mm) | DN15-100 | DN50-200 | DN80-300 | DN150-400 | DN250-500 | DN300-600 | DN400-800 | DN500-1000 |
測試閥門結構長度(mm) | 130-350 | 180-550 | 210-750 | 330-950 | 380-991 | 502-1143 | 610-1524 | 711-1727 |
測試閥門法蘭(mm) | zui大法蘭 直徑/厚度 | 265/42 | 405/55 | 530/83 | 670/92 | 775/108 | 890/108 | 1085/108 | 1360/120 |
zui小法蘭 直徑/厚度 | 90/12 | 160/169 | 195/20 | 335/26 | 390/28 | 460/28 | 520/32 | 715/34 |
移動架開檔距離(mm) | 105-605 | 150-800 | 200-1080 | 250-1200 | 300-1300 | 450-1500 | 550-2120 | 650-2350 |
裝夾機構 | 軸向行程(mm) | 52 | 62 | 75 | 80 | 90 | 95 | 100 | 105 |
徑向行程(mm) | 125 | 150 | 200 | 230 | 250 | 250 | 340 | 340 |
液壓系統 | 油泵定額壓力 MPa | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 | 6.3 |
流量(L/min) | 16 | 16 | 25 | 25 | 40 | 40 | 63 | 63 |
油壓增壓 MPa | 3.0-31.5 | 3.0-31.5 | 3.0-31.5 | 3.0-31.5 | 3.0-31.5 | 3.0-31.5 | 3.0-31.5 | 3.0-31.5 |
電源 | 380V150HZ (220V/60HZ) |
電機 | 2.2 | 2.2 | 3.3 | 3.3 | 5.5 | 5.5 | 7.5 | 7.5 |
重量(KG) | 1980 | 2400 | 3000 | 4400 | 5000 | 5600 | 8000 | 12000 |