美國(guó)Maxima TP-35000 紫外線燈/紫外線檢漏燈的詳細(xì)介紹: 
 
Maxima TP-35000 紫外線燈/紫外線檢漏燈
Ultra-High Intensity UV-A Lamp!
Powerful!    Safe!    Easy to Use!

Unmatched power
The Maxima lamp's Micro Discharge Light (MDL) technology enables its 35-watt bulb to deliver an unprecedented steady-state UV-A intensity of 60,000 μW/cm2 — 10 times the UV-A output of conventional HID lamps! This powerful lamp can reveal the smallest leak from a greater distance — even in direct sunlight! As a result, leak inspections are more comprehensive and accurate.
 
Safety in handling
The Maxima never gets hot. The lamp’s housing and contoured handle are constructed of a stay-cool engineering polymer. In addition, the handle is positioned away from the housing. This allows the entire lamp to remain cool during use to protect against accidental burn injury.
 
Integral bulb/reflector assembly
When replacing the bulb or filter, exposed wiring can be a serious shock hazard due to residual current. To eliminate this risk, the Maxima's bulb/reflector assembly is designed as a single integral unit with “unexposed" circuitry. The unique design also makes bulb replacement easy (a new bulb/reflector assembly can be installed with just a 1/4 turn) and helps maintain the original output level by providing the benefit of a new reflector whenever the bulb is replaced.
 
Unique diffusing filter
A diffusing filter, available as an accessory, can effectively diffuse the concentrated UV beam over a broader area.
 
Prefocused bulb
The bulb/reflector used in the Maxima is prefocused at the factory to ensure peak performance. This prevents the loss of UV output that may occur due to incorrect, off-center bulb installation during bulb replacement.
 
Instant on/off/restrike
The Maxima's solid-state ballast offers "instant on" capability. This eliminates waiting for warm up and saves valuable time. The ballast also protects against voltage fluctuations that can affect the lamp’s performance.
 
Super rugged and shock resistant
The lamp head and housing is made of tough engineering polymer to protect against dents, cracks and scratches. To reduce shock hazard, the Maxima comes equipped with a 5-wire secondary cord and fully enclosed ballast.
 
Lightweight, portable, ergonomic design
The lamp head measures only 71/2 inches (19 cm) long and weighs just 21/2 lbs (1.1kg). The entire unit, including the ballast, weighs 6.1 lbs (2.8 kg). The power cord exits directly from the bottom of the contoured pistol-grip handle, resulting in better balance. An on/off switch is conveniently positioned on the handle. The primary and secondary cords are both 8-feet (2.5 m) long.
 
Easy maintenance
The flexible, silicone-rubber filter holder can be removed easily without tools to replace the bulb or filter.
Parts and service are readily available.
 
Battery operated version
The Maxima TP35000M includes a 12-volt, 7amp/hr rechargeable battery that will operate the lamps for two full hours. The DC battery pack can be attached to the ballast housing, making it easy to transport. This version can also be AC operated via an interchangeable power cord. A recharger is included. Both 120V and 230V versions are available.